SUPER RESUME
< Back
Edit this resume to make it your own!

Your Name

Principal/Lead Piping Designer

Houston, TX

your.email@example.com
111-222-3333
www.your-website.com

Work Experience

Principal/Lead Piping Designer

CB&I/Lutech, Houston, TX

Oct 2011Mar 2012

  • Spearheaded the Tie-in's packages preparation for existing tankage area (REFICAR Project. Cartagena, Colombia)
  • Piping and Equipment 3-D modeling. piping isometric extraction. PDS 3-D
  • Coordinate 3-D model activities with other disciplines to reconcile interferences;
  • Coordinate with Field Survey Verification group Tie-in activities.
  • Responsible of the Tie-In list, with weekly progress update.

Principal/Lead Piping Designer

Technip, Houston, TX

Aug 2011Oct 2011

  • Spearheaded the Piperack Piping Design for the Lone Start Project (Cancelled). Mont Belview, TX.
  • Spearheaded the Tankage Area Piping Design for the Chevron Lubricant Project. Baytown, TX.
  • Piping and equipment layout activities, 3-D PDS, for 30% Client's Design Review.
  • Conducted field trips and walked through piping systems with client.

Principal/Lead Piping Designer

KBR/GAS/CDI, Houston, TX

Nov 2008Jul 2011

  • Spearheaded the design of Areas 4 (Butane Unit) and 5 (Pentane Unit) for the CONOCO Revamp Project (Benzene reduction) in Borger, TX;
  • Equipment & Piping layout, 3-D (PDS, CADworx) modeling and piping isometric extraction;
  • Coordinated 3-D model activities with other disciplines to reconcile interferences;
  • Conducted field trips and walked through piping systems with clients.
  • Lead piping field Engineer during construction and commissioning of the Butane and Pentane units. Pre-turn around and Turn around activities.

Principal Piping Designer

Fluor/TRS, Houston, TX

Nov 2007Oct 2008

  • Conducted Piping design layout in the BP Refinery expansion in Whitting, IN;
  • Lead a team of piping design in PDS 3-D layout modeling of aboveground piping system, equipment modeling, isometric extraction, general arrangements studies for the Grassroots Project.
  • Assigned to ISBL task that included: piping layout and vessel orientation for the Stripper and Compressor area.

Senior Piping Designer, Consultant

Jacobs/GAS, Houston, TX

Jul 2007Nov 2007

  • Designed PDS 3-D layout modeling of above-ground piping system, conducted equipment modeling, isometric extraction, general arrangements studies for the Corpus Christi Refinery Expansion;
  • Assigned to OSBL task that included the following: tie-in location, modeling existing piping, site trips, existing equipment relocation, interconnecting piperacks modifications, and interfacing with site personnel.

Senior Piping Designer, Consultant

Foster Wheeler/Shaw, Houston, TX

Aug 2006Jul 2007

  • Designed PDS 3-D layout modeling of above-ground and underground piping system, equipment modeling, isometric extraction, general arrangements studies;
  • Projects include the following: Butane/BTX Project (Yanbu, Saudi Arabia), Marathon Project (Canton, OH) and Jamnagar Project (India).

Lead Designer for the Sandow Project

Bechtel Power Group, Frederick, MD

Sep 2005Aug 2006

Supervising Designer (Grade 26), Frederick, MD September 2005-August 2006
  • Lead Designer for the Sandow Project, TX and the Sammis Power Plant Project, Ohio;
  • Drafted front-end engineering proposals, conducted general arrangements studies, designed 3-D modeling (underground piping systems, equipment, piping, flue ducts).

Lead Designer, Consultant

Linde BOC/ATSI, PDS, Tulsa, OK

Jan 2005Sep 2005

  • Worked for the PEMEX Project, Cryogenic Plant;
  • Designed the piping layout for 30 skid modules, conducted equipment and piping 3-D modeling, piping isometric extraction, checking, and coordinate 3-D model activities with other disciplines to reconcile interferences.

Senior Designer

Bechtel National, Richland, WA

Apr 2004Jan 2005

  • Worked for the WTP Project for the Nuclear Waste Treatment Plant.;
  • Work included: preparation of 3-D piping and equipment modeling for PT area, engaged in interdisciplinary coordination for 3-D modeling activities, reviewed vendor drawings, conducted piping isometrics extraction.

Senior Designer, Consultant, Haltfield, PA

Accusort,

Dec 2003Apr 2004

  • Worked for the USPS Project, United Stated Department of Homeland Security;
  • Retrofitted HVAC systems on 300 main USPS distribution centers, to detect and contain Anthrax contamination;
  • Prepared HVAC drawings and equipment general arrangements.

Senior Designer, Consultant

Swenson Engineering/Omega Resources, Monee, IL

Jul 2003Nov 2003

  • Led various front-end engineering projects.
  • Prepared conceptual layouts for proposals, including piping and equipment layouts.

Senior Designer

Bechtel National, Richland, WA

Nov 2001Mar 2003

  • Prepared 3-D piping and equipment modeling for LAW & HLW areas, led interdisciplinary coordination for 3-D modeling activities, reviewed vendor drawings and piping isometrics extraction for the WTP Project, Nuclear Waste Treatment Plant;
  • Designed work using PlantSpace 3-D.

Senior Designer

Bechtel Power Group/BEPOS, Frederick, MD

Feb 2000Nov 2001

  • Completed general arrangement drawings, piping (above-ground and underground) and equipment modeling, piping isometrics extraction, pipe support design, review vendor drawings, checking, and coordinated 3-D modeling activities with other disciplines to reconcile interference for the following projects: INA, Sutter, and Dabhol.

Design Specialist/Lead Design Engineer

Fluor Daniel Northwest/TRS, Richland, WA

Apr 1999Feb 2000

  • Prepared conceptual layouts for proposals, piping and equipment modeling, pipe support design, glovebox design, design review presentations, and interface with DOE for glovebox commissioning for DOE Project, Nuclear Waste Clean-up and Equipment Commissioning.

Senior Designer

Jacobs Engineering Group, Baton Rouge, LA

Aug 1998Feb 1999

  • Prepared equipment and piping modeling, isometrics extraction, and engaged in interdisciplinary coordination for the BASF Chemical Plant Expansion.

Consultant

CDI Engineering Group, Baton Rouge, LA

Jun 1998Jul 1998

  • Implemented PDS system in CDI Baton Rouge office;
  • Conducted PDS presentations to showcase CDI capabilities to prospective clients including: Exxon, DuPont, and Air products.

Design Specialist

Fluor Daniel/ TRS, Irvine, CA

Jul 1996May 1998

  • Worked for the following projects: Pertamina (Petrochemical plant, Indonesia), Pemex Cryogenic plant (field assignment in Villahermosa, Mexico), BP Cocker Unit (field assignment in Toledo, OH), Santa Barbara Cogeneration Unit.
  • Prepared conceptual equipment layouts, general arrangement drawings, fire protection piping system design, piping and equipment modeling, piping isometrics extraction, preliminary pipe stress analysis, underground piping system design, Hydrotest package preparation;
  • Conducted piping walk-through with clients for acceptance, commissioning, and start-up activities.

Lead Piping Designer

Jacobs- Serrine/ Mini Systems, Portland, OR

Jan 1995Jul 1996

  • Conducted work for the Silitec and National Semi-conductor Projects that included designing: tubing, piping and equipment design layout, cooling water systems layout for HVAC, clean rooms tools layout, wastewater treatment system, pipe support design, P & ID development.

Design Specialist

Fluor Daniel/TRS, Irvine, CA

Jul 1989Dec 1994

  • Worked for the following projects: Texaco, Unocal, Lagoven, and Hanford Nuclear Waste (VIT project);
  • Prepared conceptual facilities layouts, general arrangement drawings, preliminary pipe stress analysis, and fire protection piping system design, piping and equipment 3-D modeling, piping isometrics extraction, underground piping system design and checking.

Senior Fluids Design Engineer

General Dynamics, San Diego, CA

Jun 1987Jul 1989

  • Provided ground support system for the Atlas II, Atlas IIA and Atlas IIAS projects;
  • Prepared piping layout for cryogenic fuel systems such as: liquid hydrogen, liquid oxygen and liquid nitrogen, hydraulics, and pneumatic panel design;
  • Conducted preliminary pipes stress analysis;
  • Supervised systems installations at Cape Canaveral, FL.

R & D Senior Design Engineer

Thermco Systems, Orange, CA

Dec 1984Jan 1987

  • Conducted equipment design development for the semiconductor industry including: P & ID development, DI water systems, pressure vessel design per ASME, hydraulics and pneumatic systems for wafer handling, tubing and piping systems design layout for control panels, skid-mounted packages, interface with manufacturing shop and vendors;
  • Clients include Motorola, Fairchild, Intel, Samsung, IBM, and National Semiconductor.

Machine Designer/Design Engineer

CryoChem, Gardena, CA

Aug 1983Nov 1984

  • Conducted equipment design such as: tunnel conveyors, cryogenics pumps, cryogenics piping systems design, cold boxes;
  • Drafted front-end engineering and package proposal preparation/ presentation, equipment installation and commissioning at customer's facilities. Interface with customers, vendors and shop manufacturing personal;
  • Major client: Air Products.

Piping Designer/ Process Engineer

Ralph M. Parsons, Pasadena, CA

Jul 1982Jul 1983

  • Worked for the following projects: Los Bronces (Mining), SOHIO, Petromin, and the Space Shuttle program;
  • Prepared piping plants, piping isometrics, piping layouts, P& ID's preparation, and Pump head calculations.

Piping Designer

Fluor Engineers & Constructors, Irvine, CA

Jun 1980Jul 1982

  • Prepared piping plants, piping isometrics, and piping layouts. Work for the following Projects: Lagoven and Kenya.

Education

Bachelor of Science

Universidad Nacional,

1978

Additional Information

Over 30 years of Process Piping System Design experience. Experience in all phases of Piping System design from Project proposal (Grassroots or revamps) to piping system commissioning and includes: General equipment layout, piperack layout, tankage system layout, Vessel & nozzle orientation, compressor piping layout, air coolers, heaters, reactors, underground piping system layout, pipe supports, isometrics extractions, Isometric tracking, piping checking, P&ID yellow-off., Model design review, inter-discipline coordination, and Tie-in packages. 
 
Extensive field experience includes: P &ID walk downs, construction support, hydrotest packages, Tie-ins tags, punching lines, system commissioning, and piping system walk downs for client approval. Have been on field assignments for Projects in USA as well as International. 
 
Extensive experience in the following industries: Petrochemical, Power, Semiconductor, Nuclear (DOE) and Aerospace (DOD) 
 
Proficient in the following CAD systems: AutoCAD (6 years), MicroStation (6 years), PDS Intergraph 3-D (15 years) (Piping & Equipment modeling, EEraceway, SPR, Isogen, Orthogen), Navisworks (2 years), PlantSpace 3-D (3 years), CADworx (1 year) and 3DM (3 years) (Bechtel 3-D software).
Resume Builder | Resume Templates | Resume Examples | About Us | Privacy Policy | Terms of Use | Help Articles | Contact Us
Super-Resume.com © 2013-2017